79-93 Mustang Long Travel Front Suspension kit.

87-93 Tire Tuck w/ 300117 Spindle:
•    Weld 15 x 3.5” – 2.25BS Wheel, 26.0/4.0 MT ET Front Tire, Strange Brakes “Tire Tuck is 2 7/16”
•    Weld 17 x 4.5” – 2.25BS Wheel, 26.0/4.0 MT ET Front Tire, Strange Brakes “Tire tuck is 1 3/4”

• TBM, Aerospace & Wilwood Brakes will move the wheel out 3/8".

Ride Height:
•    Front Fender Lip 24 3/4” using 26” Tall Tire
•    6” Pinch Weld Height
•    Car Sitting Level / No Rake
•    K-member ground clearance will be 2 3/4”

8” Travel Struts:
•    7 3/8” of Extension “Measured @ tire”
•    5/8” of Compression “-1/4” for rubber cushion”
•    Can use with Racecraft Below Mounted Camber Plates: 340018, 340019

9” Travel Struts:
•    Can only use with Racecraft Above Mounted Camber Plates: 340007, 340008, 340010
•    Anything over 9” will create binding issues “Due to 12” A-arm”

**Kit Includes:

• 327920  Ultra Swap Long travel K-Member
• 3512TA00  12" Adjustable A-arms w/ New RCI Ball Joint & Hardware
• 300117 Drop Spindles
• 333100 Pinto Steering Rack
• 333109  Pinto Rack Clamp
• 333305 Bumpsteer Kit
• Choice of Below Mount Camber Plates - 79-89 Below Mount (340018) or 90-93 Below Mount (340019)
• Choice of Above Mount Camber Plates - 79-93 Elite (340010) - 79-89 Race (340007) or 90-93 Race (340008)

***Entire Kit Weight is 59.2lbs***

***DOES NOT WORK WITH THE AFCO / MENSCER LONG TRAVEL STRUTS***

***PLEASE ADD IN THE NOTE SECTION WHAT BRAND AND WHAT STROKE STRUTS YOU ARE GOING TO USE***

**Part# 300116 & 300111 Spindles can also be used with this kit.

**K-member comes Powder Coated unless you request it Bare**Expect about a 2 week lead time with Powder Coating**