The race k-member is designed to fit all 79-04 Mustangs and is the lightest k-member we offer. Along with being lightweight, it has also been designed to maximize header and engine space. Side to side header clearance was gained by utilizing the earlier 79-93 mounting points over the narrower 94-04 design. The rear mounts have also been designed with header space in mind by only using the outer two bolts, allowing for removal of the inner half of the brackets. The rack location has also been altered by moving the rack 1 1/2" down and 3/4" back from the factory location. This allows for a larger oil pan, a lower crankshaft centerline, or moving the engine towards the firewall. If even more clearance is desired, a Pinto rack can be used in place of an OEM style rack.

We typically recommend the following A-arm lengths:

• 79-93 Mustang - 12"
• 94-98 Mustang - 12"
• 99-04 Mustang - 13"

• K-members come powder coated Gloss Black unless you specify bare. Expect about a 1-2 week lead time with powder coating.

• Racecraft K-Members WILL ACCEPT ANY Aftermarket Tubular A-Arms That Are Constructed To Stock Dimensions.
• 79-93 Mustang K-Members WILL ACCEPT STOCK A-ARMS
• Grade 8 Bolt Kit is not Standard (Click HERE) for more information on K-Member Bolt Kit
• If using Motor Mounts the alignment pin on the passenger side may need to be ground off.
• K-member does not come with Motor Mount Perches unless they are selected.

Weights

• Stock K-member weighs- 51.0 lbs
• Racecraft Inc K-member weighs- 18.2 lbs w/ Motor and Pinto Rack Mounts
• Weight Savings- 32.8 lbs