1979-2004 Mustang Elite X 4130 Fab Housing

Starting at: $3,200.00

The Racecraft Inc. Elite X 4130 Fab Housing for 79-04 Mustang is by far the sickest housing you can buy! All the key features from every one of our other 79-04 housings is incorporated into the Elite X. If you're looking for an Ultra-Light Stock Suspension Housing that will handle whatever you throw at it and work like no other, then look no further! This housing is being utilized in the Racecraft Inc. Shop Car, sponsored to Fiscus/Klugger Racing and by many other top Stock Suspension racers today.

All Racecraft ProLite housings offer a 20lb weight savings over conventional designed housings, but does not sacrifice any of the brute strength Racecraft housings are known for. Every housing built is welded in a precision fixture to assure our customer the truest and straightest housing available. Only after the housing is completely welded, the faceplate is machined for a perfect fit when the center section is installed. All of our housings are 100% built in house to the customer's needs, with the same quality as all of our other hardcore racing parts. This is the strongest, straightest, and best engineered housing available for a true bolt in 9" Fabricated housing.

Housing Features:

  • Smaller Panels & Surfaces Allow For The Use Of Thinner Materials
  • Extreme Compact Design
  • 40 Ounce Lube Capacity
  • 100% Tig Welded 4130 Chromoly Construction
  • 20lb Weight Savings Over Conventional Designed Housings
  • 38lb Bare Housing Weight
  • Housing Includes:

  • ARP Stud Kit
  • Filler Cap
  • Drain
  • Vent
  • Faceplate O-Ring
  • Elite Double Hole UCA BRKTS
  • Elite Double Hole LCA BRKTS
  • Upper WBM
  • Shock MNT Holes:

  • Strange - 1/2" x 1"
  • Afco - 1/2" x 1"
  • Santhuff - (1/2" x 1" Standard) or 7/16" x 7/8"
  • Penske - (1/2" x 1" Standard) or 7/16" x 7/8"
  • JRI - (1/2" x 1" Standard) or 7/16" x 7/8"
  • QA1 - 7/16" x 7/8"
  • Link to Control Arm Spacer Layouts:

  • 1/2" & 5/8" Upper & Lower Control Arms

  • *Important Notes:

  • Housing is specifically designed for the Strange Ultra Case and Magnesium Case ONLY!!!
  • Dewco/Mark Williams/Moser/Standard Strange or any other carriers will not fit.
  • Inner Housing Gussets are required if making more than 1800HP.
  • *****MUST CALL TO ORDER DO NOT ORDER ONLINE*****



    Add to Cart:

    • Model: 211105

    Please Choose: