8.8 Rear End Housings
8.8 REAR END HOUSINGS
Application Ford 8.8″ rear end Using aftermarket gear sets Will Not Work With Ford Performance Gear Sets Benefits Maintains proper bearing... more info
Model:
R5230PS
$22.00
Bolts into factory shock stud hole and allows you to run a spherical bearing coil over shock. Used in conjunction with Part # 210480 as the upper... more info
Model:
327481
$79.00
These brackets bolt into the factory spring pocket on 79-04 Mustang. Designed to adapt from the factory spring to a conventional 3- 1/2" OD x... more info
Model:
327482
$89.00
8.8 Ford Master Installation Kit Features Timken® Bearings & Races Will Not Fit 2013-2014 Shelby GT 500 or GT Track Pack Kit Includes... more info
Model:
R5231
$98.00
Strange Engineering Billet 8.8 Bearing Caps. Billet aluminum (2024-T351) caps for Ford 8.8" (REQUIRES MACHINING) Sold in Pairs more info
Model:
H1124
$120.00
8.8 Stock Style Lower Control Arm Housing Bracket Kit is constructed of 3/16" Mild Steel with 5/8" Lower Control Arm mounting holes.... more info
Model:
210481
$125.00
Spherical Housing Bearings 1/2" (pair) Replaces sloppy stock rubber bushing Provides solid pinion movement with no bind Not Recommended for... more info
Model:
210601
$125.00
This kit allows you to convert to a spherical bearing coil over shock in the factory location. Supplied in this kit is the upper and lower brackets... more info
Model:
210142
$134.00
2.80" O.D. Axle Tube 8.8 Elite Adjustable Coil Over Shock Mount Kit W/ Cross Tube Notch allows installation of two coil-over rear shocks on any... more info
Model:
210140
$140.00
Ford 8.8 rear ends Using 1350 series u-joint Features • 4140 chrome moly steel • Additional material in critical areas • Machined to... more info
Model:
U1596
$150.00
Early Big Ford 3.150 Bearing Housing Ends for 2-7/8" to 3-1/4" Axle Tubes (Pair) This 3.150 Housing end is very similar to our 3-1/2"... more info
Model:
RC23853
$165.00
Late Big Ford 3.150 Bearing Housing Ends for 2-7/8" to 3-1/4" Axle Tubes (Pair) This 3.150 Housing end is very similar to our 3-1/2"... more info
Model:
RC23852
$165.00
This 8.8 wish bone mount is the same piece that is used on our 8.8 Elite Housing. It is designed to bolt to the cast center along with some welding.... more info
Model:
210146
$185.00
Our Brace Kit is designed to tie the cast center section to the axle tubes. This keeps the rear end from flexing under hard launches which in the... more info
Model:
210486
$189.00
Strange Engineering 8.8 Aluminum Differential Cover. The support cover features two premium grade load bolts; providing main cap support. The... more info
Model:
R5233
$195.00
Strange Ford 8.8 C-Clip Eliminator Kit was originated by Strange Engineering, are required by drag racing rules for good reason. C-Clip type axles... more info
Model:
A1090
$195.00
Strange Engineering 8.8 Aluminum Differential Cover. The support cover features two premium grade load bolts; providing main cap support. The... more info
Model:
R5234
$215.00
***Currently Out of Stock*** 79-04 Mustang 8.8 Elite Lower Control Arm Bracket kit w/ crosstube notch. 2.80" Axle tube. Parts come... more info
Model:
210148
$225.00
Ford 8.8 Bolt On Lower Control Arm Housing Brackets. The bracket holes are 1/2" not 12mm. Comes with all the necessary grade 8 hardware.... more info
Model:
210480
$249.00
The bracket O.D. is designed to be 36 1/2", but can be shortened to desired dimension. All brackets come welded together for the ease of... more info
Model:
210147
$340.00
Strange Engineering 8.8 Posi Unit is an ideal direct replacement for OEM units. Pro Series cone type posi units are a hi-bias differential design... more info
Model:
N1869
$600.00
This bracket kit is the same brackets we use on our 8.8 Elite Housing (PN # 210500). The kit is designed for the Lower Control Arm Bracket OD width... more info
Model:
210145
$650.00
Racecraft Inc. 4130 wishbone with 8.8 housing mount is made to fit the 79-04 Mustang. This wishbone is designed to keep the rear housing centered in... more info
Model:
327486
$684.00
This kit includes everything you need to convert your 8.8 based Mustang to a coil over set up in the factory shock location. The double adjustable... more info
Model:
210483
$1,805.00