Update 06/16/09:
RACECRAFT.COM is being updated!
As part of our continuing effort to provide the drag racing community with superior racing parts and merchandise,
RaceCraft has put the new website in high gear.
Soon, RaceCraft.com will help you find the parts you need, faster and more efficiently.
FEATURED PRODUCTS
Bottle Bath
click here
Measurements:
9 in. front to back, 18 in. top to bottom and 20 in. wide.
Capacity:
Two Nitrous bottles and approx. 5 gallons of water. Hot water method for heating bottles is more ideal than using hot air methods. This eliminates the need for bulky four bottle hot air heaters.
- This heater will heat a 60 degree bottle to 102 degrees in 10 minutes.
- Water heating is a more thorough method of heating because it heats the bottle and the liquid throughout, allowing the bottles to maintain their temperature for a longer period of time than bottles heated with hot air. This is especially helpful when waiting in the lanes on cooler Spring and Fall days.
- No babysitting the bottles! Once the thermostat is set to the desired temperature the bottles will never get hotter than the preset temperature whether they are heated for 10 mins or 2 hours.
- Can also be used to reduce the temperature of bottles left out in the sun that are overheated. You can bring them in the trailer and put them in the heater to bring them down to the ideal temperature.
- The hot water method vs. hot air... The Bottle Bath hot water heater will give you more consistent bottle temperatures along with less waiting than hot air heaters.
Mustang Rear End Housing
 
click here
This is the housing featured in the the August issue of 5.0 Mustang Magazine being installed in KJ Jones's Project 340 Mustang
The Racecraft Inc. Fabricated 9" Mild Steel housing is available for 79-04 Mustangs and 05-09 Mustangs. Our housing fixes a common problem with all the current fabricated housings in the market, the problem being that the upper control arm mounts are not in the stock location. Our fabricated housings have a "True Stock Location" position along with one hole lower and one hole higher than the stock location These improved hole locations keep the upper bar angle from being severely angled downward when the rear of car is set at a lowered rear ride height. We also have a version which takes the spherical/urethane stock style control arm. The Racecraft housing is mig welded in a precision fixture to assure a true and straight housing. The 3/8" thick CNC face plate is machined and beveled in our in house machining center, the CNC bevels provide perfect weld fitment which makes for a superior weld joint at the face plate and rear of the housing. This is the strongest, straightest, and best engineered housing available for a true bolt in 9" Fabricated housing.
The housing is avaliable with an optional back brace for even more strength, adjustable lower coil over shock brackets, wheelie bar brackets, custom length option, and floater syle housing ends
K-Members
Update 10/01/08: Racecraft Inc. would like to announce the addition of our new Mild Steel 1979-2004 Ford Mustang Tubular K-Members and Tubular A-Arms. These K-Members and A-Arms are built to same exacting specifications as our 4130 Chrome Moly pieces, but the production processes have been streamlined to provide the budget minded racer the best product for the money. All parts are assembled using the same style tabs and components, and MIG welded in newly redesigned fixtures, ensuring a perfect fit every time for trouble free installations.
Prices for K-Members starting at: $339.00
Prices for A-Arms starting at: $279.00
K-Member Kits (K-Member, A-Arms, Coilover Kit) starting at: $749.00
Update 4/14/08: Racecraft Inc. would like to announce the development of our new lightweight Spindle Mount 2" Drop Spindles for late-model Mustangs & Camaros. These were designed to offer the ulitmate in weight savings for drag racing applications. Development is currently under way with an expected release date of May 31st for all versions.
Click below for more information.
79-93 Mustang
82-92 Camaro
93-02 Camaro
Update 3/10/08: Racecraft Inc. now has our 1993-2002 Camaro 2" Drop Spindles in stock and ready to ship. These spindles offer an astounding 46 lbs of weight savings over stock when paired with the Strange Engineering 1982-1992 Camaro Brake Kit.
Please click HERE for more information.
Update 2/14/08: Just in time for valentines day!!! Racecraft Inc. is proud to introduce our completed 1982-1992 Camaro 2" Drop Spindles. These are In stock and ready to ship.
Please click HERE for more information.
Update 12/12/07: Racecraft Inc. is currently looking for experienced fabricators, as well as a shipping assistant. For more information about any of the available positions, please click HERE.
Update 12/11/07: Racecraft Inc. would like to say thanks to everyone that stopped by our booth at this years PRI show in Orlando, FL. It was an exciting show, and we are extremely pleased with the amount of interest everyone showed. Take a look at some of the highlight photos HERE.
Update 10/9/07: Racecraft Inc. has finished development of our new 3rd and 4th Generation Camaro 2" Drop Spindles. We will debut the finished prototypes this weekend at the NMCA event in Memphis, TN. All previous spindle orders will be shipped November 5.
Click HERE For More Details
Check Out: Racecraft Inc. 2" Drop Spindles on David Padron's 1990 Mustang GT Pro Am drift car. He will be competing with the car in this years Formula D series.
Video 1 Video 2
Spindle Evaluation: NASA racer Richard Pederson has put the Racecraft Inc. 2" drop spindles through their paces on the track, and has created a post with a detailed evaluation of their on track performance and construction as well. Click here to read the post on corner-carvers.com.
Event Update: Here are some pictures of the Racecraft Inc. crew at the Route 66 Raceway in Joliet, IL. We debuted our new event rig and were very pleased with the response. Make sure to come out and see us next time in Bowling Green, KY at the Nitto Tire NMRA world finals October 4-7.
  
New T-Shirt Design: Check out the new Racecraft Inc. T-shirts. Sizes available from M-XXL with prices starting at $15
New Product!!! Racecraft Inc. introduces our new billet steel double adjustable upper control arms for 79-04 Mustangs.
ONLY $299
New Product!!! Racecraft Inc. introduces our new 2005-2007 Mustang tubular K-Member and A-Arm package.
PRICED AT $1099
Event Update: Please click HERE for pictures and video of Jim Robbins RACECRAFT INC. built Camaro at last weekends ORSCA season opener at Huntsville Dragway.
Check out: Jim Robbins RACECRAFT INC. built 1968 Camaro this weekend at the ORSCA season opener.
The race will be held at Huntsville Dragway.
Check back Monday for pictures and video from the race.
Update: Our newly redesigned 1979-1993 Mustang 2" drop spindles are now in stock and ready to ship.
 
Congratulations: To Dan Schoneck for his 1st place finish in the Renegade class at this years FFW: Spring Break Shootout in Orlando, FL. His RACECRAFT INC. built Mustang went 7.734 @ 177.58 mph to take the win.
© 2009 Racecraft Inc.
All Rights Reserved
|
